- Bộ lập trình PLC, cáp lập trình
- Màn hình HMI
- Cảm biến, phụ kiện
- Biến tần, khởi động mềm
- Máy cắt, Aptomat, khởi động từ
- Thiết bị đo lường, bảo vệ
- Thiết bị công nghiệp, tự động hóa
- Thủy lực, khí nén, van công nghiệp
- Motor, Servo motor, Servo Amplifier
- Thyristor, Module, SCR, SSR, Diode
- Phụ kiện tủ điện và vỏ tủ điện
- Cáp điện, ống bảo vệ cáp
- Thiết bị điện trung thế, truyền tải
- Thiết bị chống sét, kim thu sét
- Dụng cụ cầm tay, dụng cụ tool
- ATS, UPS, tụ bù, cuộn kháng
-
Thiết bị ngành xi măng, thép, nhiệt điện
-
Thiết bị thanh lí-hàng tháo máy
Bộ điều khiển lập trình Schneider PLC Modicon TM221 TM221C16R TM221C24R TM221C40R TM221C16T TM221C24T TM221C40T TM221C16U TM221C24U TM221C40U TM221CE16R TM221CE24R TM221CE40R TM221CE16U TM221CE24U TM221CE40U
Tình trạng sản phẩm:
-
Product Features
main information Product Series Modicon M221 product type Programmable Controllers Rated power supply voltage [Us] 100...240 V AC Discrete input quantity 9 Discrete input conforms to IEC 61131-2 Type 1 Number of analog inputs 2 at input range: 0...10 V Solid state output type Relay normally open Discrete output quantity 7 Relay Discrete output voltage 5...125 Volt (V) DC
5...250 Volt (V) ACDiscrete output current 2 A Additional information Discrete I/O number 16 Number of I/O expansion modules <= 4 suitable for transistor output
<= 4 suitable for relay outputPower supply voltage range 85...264 V Network frequency 50/60 Hz Instantaneous peak current <= 40 A Power consumption VA <= 49 VA on 100...240 V maximum number of I/O expansion modules
<= 33 VA on 100...240 V without I/O expansion modulesPower output current 0.325 A on 5 V for expansion bus
0.12 A on 24 V for expansion busDiscrete input logic Sink or source (positive/negative) Discrete input voltage 24 V Discrete input voltage type Direct current Analog input resolution 10 bits LSB value 10 mV Conversion time 1 ms per channel + 1 controller cycle time for analog input Permissible overload at the input +/- 30 V DC for analog input and 5 minutes maximum
+/- 13 V DC for analog input constantVoltage state 1 guarantee >= 15 V applicable input Voltage state 0 guarantee <= 5 V applicable input Discrete input current 7 mA for discrete input
5 mA for fast inputinput resistance 4.9 kOhm for fast input
3.4 kOhm for discrete input
100 kOhm for analog inputResponse time 10 ms open operation suitable for output
35 µs close operation suitable input; I2...I5 terminal
10 ms close operation suitable for output
5 µs open operation suitable for fast input; I0, I1, I6, I7 terminal
35 µs open operation suitable input; other terminals terminal
5 µs off operation for fast input; I0, I1, I6, I7 terminal
100 µs off operation for input; other terminals terminalConfigurable filter time 0 ms for input
12 ms for input
3 ms for inputOutput voltage limit 125 V DC
277 V ACConnection type-terminal connection 6 A on COM 1 termnal
7 A on COM 0 termnalAbsolute accuracy error +/- 1% of full scale for analog input Electrical life Inductive load AC-15, (cos phi = 0.35) 240 V / 120 VA: 100000 times
resistive (load) DC-12, 24 V / 48 W: 100000 times
resistive (load) AC-12, 120 V / 240 VA: 100000 cycles of
inductive load AC-15, (cos phi = 0.35) 240 V / 36 VA: 300,000 cycles of
resistive (load) AC-12, 120 V / 80 VA: 300,000 cycles of
inductive load (L/R = 7 ms ) DC-13, 24 V / 24 W: 100000 cycles
resistive (load) DC-12, 24 V / 16 W: 300,000 cycles
inductive (L/R = 7 ms) DC-13, 24 V / 7.2 W: 300,000 times
inductive load AC-14, (cos phi = 0.7) 240 V / 240 VA: 100000 times
inductive load AC-15, (cos phi = 0.35) 120 V / 60 VA: 100000 times
inductive load AC-14, (cos phi = 0.7) 240 V / 72 VA: 300,000 times
inductive load AC-15, (cos phi = 0.35) 120 V / 18 VA: 300,000 times
resistive (load) AC-12, 240 V / 480 VA: 100000 times
inductive Load AC-14, (cos phi = 0.7) 120 V / 120 VA: 100000 times
Resistive (load) AC-12, 240 V / 160 VA: 300,000 times
inductive load AC-14, (cos phi = 0.7) 120 V / 36 VA: 300,000 timesoperating frequency 20 switching operations/minute with maximum load Mechanical life >= 20000000 times applicable relay output Minimum load 1 mA at 5 V DC for relay output Type of protection Unprotected on 5 A Reset time 1 s storage 256 kB for user application and data RAM and 10000 instructions
256 kB for internal variables RAMdata backup 256 kB built-in flash memory for backup of application and data Data storage device 2 GB SD card optional Battery Type BR2033 lithium non-rechargeable, battery life: 4 years Cumulative running time 1 year at 25 °C by interrupting the power supply 1K instruction execution time 0.3 ms for events and periodic tasks _ 0.2 µs Boolean Execution time of each task 60 µs response time Maximum target area size 512 %M memory bits
8000 %MW memory words
255 %C counters
255 %TM timers
512 %KW constant wordsReal Time Clock Have Clock error <= 30 s/month at 25 °C Control loop Adjustable PID regulator up to 14 synchronous cycles Calculate the number of inputs 4 Fast input (high counting mode) (counting frequency: 100 kHz), counting capacity: 32 bits Control signal type Single phase
A/B
pulse/directionIntegrated connection type USB port with connector mini B USB 2.0
Ethernet with connector RJ45
non-isolated serial link "serial 1" with connector RJ45 and interface RS232/RS485power supply Serial The serial link is powered at 5 V 200 mA Transfer rate 1.2...115.2 kbit/s (default 115.2 kbit/s) for bus length... 15 m-communication protocol: RS485
1.2...115.2 kbit/s (default 115.2 kbit/s) for bus length... 3 m-Communication protocol: RS232
480 Mbit/s-Communication protocol: USBProtocol USB port: USB protocol-SoMachine-Network
non-isolated serial link: Modbus protocol master/slave-RTU/ASCII or SoMachine-Network
: Ethernet protocolEthernet port 10BASE-T/100BASE-TX 1 port and 100 m copper cable Communication service Modbus TCP slave device
DHCP client
Ehternet/IP converter
Modbus TCP server
Modbus TCP clientLocal signal 1 LED green for accessible SD card (SD)
1 LED red for BAT
per channel 1 LED green for I/O status
1 LED green for SL
Ethernet network activity green for ACT
Ethernet network connection yellow applicable link (link status)
1 LED red applicable module error (ERR)
1 LED green applicable PWR
1 LED green applicable RUNElectrical connections Mini B USB 2.0 connector to a programming terminal terminal
block, 3 terminals for connecting 24 V DC power
connector, 4 terminals for analogue inputs
Removable screw terminal for input and
removable screw terminal for outputcable length <= 10 m shielded cable for fast input
<= 30 m unshielded cable for output
<= 30 m unshielded cable for digital signal input
<= 1 m unshielded cable for analog inputisolation 2300 V AC between output and internal logic
Non-insulated between analogue inputs
500 V AC between
input and internal logic Non-insulated between analogue inputs and internal logic
1500 V AC between supply and ground
500 V AC between sensor power supply and ground
500 V AC between input and ground
1500 V AC between output and ground
2300 V AC between supply and internal logic
500 V AC between sensor power supply and internal logic
500 V AC between Ethernet terminal and internal logic
2300 V AC between supply and sensor power supplyLogo CE Sensor power supply 24 V DC at 250 mA supplied by the controller Installation method Top hat type TH35-15 Rail installation conforms to IEC 60715
Top hat type TH35-7.5 Rail installation conforms to IEC 60715
board or board with fixing kithigh 90 mm depth 70 mm width 95 mm product weight 0.346 kg environment Standards compliant EN/IEC 60664-1
EN/IEC 61131-2
EN/IEC 61010-2-201certified product CSA
cULus
DNV-GL
RCM
IACS E10
ABS
LR
EACEnvironmental characteristics Ordinary and hazardous location Anti-static discharge 4 kV contact in accordance with EN/IEC 61000-4-2
8 kV in air in accordance with EN/IEC 61000-4-2Anti-electromagnetic domain 10 V/m (80 MHz...1 GHz) in accordance with EN/IEC 61000-4-3
3 V/m (1.4 GHz-2 GHz) in accordance with EN/IEC 61000-4-3
1 V/m (2.. .2.7 GHz) Conforms to EN/IEC 61000-4-3Withstand the magnetic field 30 A/m at 50...60 Hz conforming to EN/IEC 61000-4-8 Ability to resist instantaneous pulse 2 kV applicable power line conforms to EN/IEC 61000-4-4
2 kV applicable relay output conforms to EN/IEC 61000-4-4
1 kV applicable Ethernet line conforms to EN/IEC 61000-4-4
1 kV applicable serial link conforms to EN /IEC 61000-4-4
1 kV applicable E/S conforms to EN/IEC 61000-4-4Surge tolerance 2 kV applicable power line (AC) internal common mode conforms to EN/IEC 61000-4-5
2 kV applicable relay output internal common mode conforms to EN/IEC 61000-4-5
1 kV applicable E/S internal common mode conforms to EN/IEC 61000-4-5
1 kV Applicable shielded cable internal common mode conforms to EN/IEC 61000-4-5
0.5 kV Applicable power line (DC) Internal differential mode conforms to EN/IEC 61000-4-5
1 kV Applicable power line (AC) Internal differential mode conforms to EN/IEC 61000-4-5
1 kV Applicable relay output Internal differential mode conforms to EN/IEC 61000-4-5
0.5 kV Applicable power line (DC) internal common mode conforms to EN/IEC 61000-4-5Conducted interference resistance 10 Vrms (0.15...80 MHz) conforms to EN/IEC 61000-4-6
3 Vrms (0.1...80 MHz) conforms to marine specifications (LR, ABS, DNV, GL)
10 Vrms (calibrated frequency (2, 3 , 4, 6.2, 8.2, 12.6, 16.5, 18.8, 22, 25 MHz)) in line with marine specifications (LR, ABS, DNV, GL)Electromagnetic radiation Conducted emission complies with EN/IEC 55011 power cord (AC), 0.15...0.5 MHz: 79 dBμV/m QP/66 dBμV/m AV
conducted emission complies with EN/IEC 55011 power cord (AC), 0.5...300 MHz : 73 dBμV/m QP/60 dBμV/m AV
conducted emission in accordance with EN/IEC 55011 power line, 10...150 kHz: 120...69 dBµV/m QP
conducted emission in accordance with EN/IEC 55011 power line, 150 kHz ...1.5 MHz: 79...63 dBμV/m QP
conducted emission in accordance with EN/IEC 55011 power cord, 1.5...30 MHz: 63 dBμV/m QP
radiated emission in accordance with EN/IEC 55011 Class A 10 m, 30 ...230 MHz: 40 dBμV/m QP
electromagnetic radiation in accordance with EN/IEC 55011 A 10 m, 200 MHz...1 GHz: 47 dBμV/m QPResistance to instantaneous power failure 10 ms Ambient temperature -10...55 °C for vertical installation
-10...35 °C for vertical installationStorage temperature -25...70 °C Relative humidity 10...95% during non-condensing operation
10...95% during non-condensing storageIP protection level IP20 protective cover in place Pollution level <= 2 Working altitude 0...2000 m Storage height 0...3000 m Anti-vibration 3.5 mm vibration frequency: 5...8.4 Hz) on the uniform rail
1 gn vibration frequency: 8.4...150 Hz) on the uniform rail
3.5 mm vibration frequency: 5...8.4 Hz) on the upper panel Installation
1 gn Vibration frequency: 8.4...150 Hz) Installation on the upper panelImpact resistance 98 m/s² (Test waveform time: 11 ms) Sustainability product type Green product certification mark (Green Premium) products RoHS regulations (date code: YYWW) Conformity-Since 1415-Schneider Electric declaration of conformity REACh regulations Environmental compliance provide support Recycling guide provide support
-
- Mô đun truyền thông UTEK 24-port rack-mounted 100M industrial Ethernet switch unmanaged UT-6524 Liên hệ
-
- Mô đun truyền thông UTEK 100M 8-port industrial Ethernet switch 100M rail-type unmanaged UT-6408 Liên hệ
-
- Mô đun truyền thông HI-TOP Modbus RTU/TCP to EtherCAT protocol converter gateway HT3S-ECS-MDN Liên hệ
TÂN THÀNH CAM KẾT
- Sản phẩm, hàng hóa chính hãng.
- Giá cả cạnh tranh.
- Dịch vụ chăm sóc khách hàng tận tâm.
Thông Tin Công Ty
Chính sách và quy định
Đã thông báo
Hỗ trợ khách hàng
THÔNG TIN LIÊN HỆ:
-------------------------------
CÔNG TY TNHH THIẾT BỊ CÔNG NGHIỆP TTH
Trụ sở: số 124 ngõ 79 Yên Hoà-Cầu giấy-HN
Kinh doanh 1 : 0816.861.515
Kinh doanh 2 : 0836.861.515
Email: tthkinhdoanh@gmail.com
Email: tthkinhdoanh01@gmail.com
