- Bộ lập trình PLC, cáp lập trình
- Màn hình HMI
- Cảm biến, phụ kiện
- Biến tần, khởi động mềm
- Máy cắt, Aptomat, khởi động từ
- Thiết bị đo lường, bảo vệ
- Thiết bị công nghiệp, tự động hóa
- Thủy lực, khí nén, van công nghiệp
- Motor, Servo motor, Servo Amplifier
- Thyristor, Module, SCR, SSR, Diode
- Phụ kiện tủ điện và vỏ tủ điện
- Cáp điện, ống bảo vệ cáp
- Thiết bị điện trung thế, truyền tải
- Thiết bị chống sét, kim thu sét
- Dụng cụ cầm tay, dụng cụ tool
- ATS, UPS, tụ bù, cuộn kháng
-
Thiết bị ngành xi măng, thép, nhiệt điện
-
Thiết bị thanh lí-hàng tháo máy
Bộ lưu điện UPS APC SRC10000XLICH 10KVA/8000W
APC SRC6000XLICH 6000VA 4200W Built-in 12V5AH 16-section external 192VDC battery pack online host
Tình trạng sản phẩm:
| SRC10000XLICH basic performance | |
| LCD graphic representation | Text and simulations show operating modes, system parameters, and alarms. |
| Smart-UPS Performance and Benefits | |
| Availability | |
| Automatic internal bypass | Provides utility power to connected loads in the event of a UPS overload or failure |
| Scalable runtime | Allow more rapid uptime when needed |
| Smart battery management | Get the best battery performance, longevity and reliability with intelligent, precise charging technology. |
| Hot swap battery | Ensure a clean, uninterrupted power supply to protect the device throughout the battery replacement process |
| Automatically restart the load after the UPS is shut down | Once the utility power is restored, the connected device is automatically restarted. |
| Temperature compensated battery charging | Adjust the charging voltage according to the actual battery temperature to extend battery life |
| Manageability | |
| Network management | Provides remote management of UPS over the network |
| Compatible with Infineon Manager | For centralized management through APC's Infineon Manager software. |
| SmartSlot slot | Customize UPS performance with management card |
| USB interface | Manage UPS with USB port |
| LED status indicator | Quickly understand device and power status with video indicators. |
| Serviceability | |
| User replaceable battery | Easy to upgrade and replace batteries |
| Automatic self-test | Regularly self-check the battery to ensure that the battery that needs to be replaced is detected early. |
| Predictive failure notification | Early warning failure analysis provided ensures timely replacement of components |
| Disconnect battery notification | Warning when the battery cannot provide backup power |
| Audible alarm | Provide notice of changes to utility and UPS conditions |
| Adaptability | |
| Plug and play external battery | Ensures a clean, uninterrupted power supply when adding additional runtime to the UPS |
| Flash upgradeable firmware | Use the FTP to remotely install the maintenance version of the firmware. |
| Rack/tower conversion | Protect the initial investment in UPS when moving from tower to rack-mount environment |
| System protection | |
| Power regulation | Protect connected loads from surges, spikes, lightning, and other power disturbances. |
| Input power factor correction | Minimize installation costs by using small generators and wire connections |
| Compatible generator | When using generator power, ensure a clean, uninterrupted power supply to protect the equipment |
| Cold start capability | Provide temporary battery power when utility power is stopped |
| Resettable line switch | It is easy to recover from the overload with a replacement fuse. |
| Certified by a security agency | The product is tested and certified to ensure safe operation with the connected service provider equipment within the specified environment. |
| Frequency and voltage adjustment | Poor frequency and voltage conditions can be corrected without the use of a battery, providing higher availability. |
| Official parameter link | http://www.apc.com/products/resource/include/techspec_index.cfm?base_sku=SRC10000XLICH&total_watts=200 | ||
| Output | |||
| Output power capacity | 8000 watts/10KVA | ||
| Maximum configurable power | 8000 watts/10KVA | ||
| Output voltage adjustable range | Configurable for 220 or 230V rated output voltage | ||
| Rated output voltage | 230V | ||
| Waveform type | Sine wave | ||
| Full load efficiency | 90% | ||
| Output voltage distortion | Less than 3% | ||
| Output frequency (synchronized with the main frequency) | 50/60 Hz +/- 3 Hz user adjustable +/- 0.1 | ||
| Crest factor | 3:1 | ||
| Output voltage THD | < 3% linear load | ||
| bypass | Built-in bypass | ||
| Other output voltage | 220,240 | ||
| Output connection | (1) Hard Wire 3-wire (HN + G) | ||
| Input | |||
| Rated input voltage | 230V | ||
| Input frequency | 40-70Hz (automatic sensing) | ||
| Input terminal type | Hard Wire 3 wire (1PH+N+G) | ||
| Operating voltage range | 160 - 280V | ||
| Maximum input current | 60A | ||
| Other input voltage | 220,240 | ||
| Adjustable input voltage range | 100 - 280V | ||
| Battery run time | |||
| battery model | VRLA | ||
| Empty battery slot | 1 | ||
| Typical charging time | 3 hours | ||
| Communication and management | |||
| Interface port | DB-9 RS-232, SmartSlot slot | ||
| Number of smart slots available | 1 | ||
| control panel | The LED status display has a load and battery bar graph and "online", "battery on", "replace battery", "overload" and "bypass" indicators. | ||
| Emergency shutdown | Optional | ||
| Audible alarm | Alarm when the mains is out of power: Special low battery alarm overload continuous tone alarm | ||
| Surge protection and filtering | |||
| Surge suppression energy | 420 joules | ||
| filter | Multi-stage noise filter in accordance with UL1449 | ||
| Physical index | |||
| high | 440.00 mm | ||
| width | 261.00 mm | ||
| deep | 663.00 mm | ||
| Equipment installation effective height | 6U | ||
| net weight | 86.50 KG | ||
| Shipping weight | 107.00 KG | ||
| Transport height | 526.00 mm | ||
| Transport width | 600.00 mm | ||
| Transport length | .750.00 mm | ||
| colour | black | ||
| Number of products per shipping pallet | 12.00 | ||
| surroundings | |||
| working environment | 0 - 40 °C | ||
| Working relative humidity | 0 - 95% | ||
| Operating height | 0-3000 meters | ||
| storage temperature | -20 - 50 °C | ||
| Storage relative humidity | 0 - 95% | ||
| Storage height | 0-15000 meters | ||
| Audible noise from the surface of the device | 55.00 dBA | ||
| Online heat dissipation | 652.00 BTU/hr | ||
| Conformity | |||
| Management agency certification | EN 60950, EN/IEC 62040-2 | ||
| Environmental compliance requirements | RoHS 7b Exemption, China RoHS, REACH: Does not include SVHC | ||
| Standard warranty | 2-year warranty or replacement (excluding battery), battery warranty or replacement for 1 year, extended internal authorization available, on-site service | ||
| **The time required for the UPS to recharge to 90% of the battery capacity after discharging with a 50% rated capacity load. | |||
TÂN THÀNH CAM KẾT
- Sản phẩm, hàng hóa chính hãng.
- Giá cả cạnh tranh.
- Dịch vụ chăm sóc khách hàng tận tâm.
Thông Tin Công Ty
Chính sách và quy định
Đã thông báo
Hỗ trợ khách hàng
THÔNG TIN LIÊN HỆ:
-------------------------------
CÔNG TY TNHH THIẾT BỊ CÔNG NGHIỆP TTH
Trụ sở: số 124 ngõ 79 Yên Hoà-Cầu giấy-HN
Kinh doanh 1 : 0816.861.515
Kinh doanh 2 : 0836.861.515
Email: tthkinhdoanh@gmail.com
Email: tthkinhdoanh01@gmail.com
