- Bộ lập trình PLC, cáp lập trình
- Màn hình HMI
- Cảm biến, phụ kiện
- Biến tần, khởi động mềm
- Máy cắt, Aptomat, khởi động từ
- Thiết bị đo lường, bảo vệ
- Thiết bị công nghiệp, tự động hóa
- Thủy lực, khí nén, van công nghiệp
- Motor, Servo motor, Servo Amplifier
- Thyristor, Module, SCR, SSR, Diode
- Phụ kiện tủ điện và vỏ tủ điện
- Cáp điện, ống bảo vệ cáp
- Thiết bị điện trung thế, truyền tải
- Thiết bị chống sét, kim thu sét
- Dụng cụ cầm tay, dụng cụ tool
- ATS, UPS, tụ bù, cuộn kháng
-
Thiết bị ngành xi măng, thép, nhiệt điện
-
Thiết bị thanh lí-hàng tháo máy
BỘ NẠP ẮC QUY VERTIV/EMERSON HD11010-5, ER11010/S
Power module ER11020/T ER22020/T ER11040/T5 ER11010/S original authentic
System features:
1, three-phase three-wire voltage input, three-phase current balance, with AC over-voltage protection;
2, wide voltage input range 304V ~ 456V, strong adaptability;
3, using soft switching technology, high efficiency, electromagnetic compatibility Good performance, small size, light weight, high module performance;
4, module with hot plug technology, easy to maintain;
5, using stepless current limit design, battery charging current limit accuracy;
6, with overvoltage, Automatic protection function, alarm measures such as current limiting, short circuit, parallel, over temperature, over current, etc., with remote control, telemetry, remote signaling, remote adjustment function;
7. Built-in CPU distributed control mode, with convenient communication and strong anti-interference ability;
8, independent LED display, can query the module's voltage, current, address and fault information;
9, the module has hardware current sharing unit circuit, the system expansion becomes simple;
10, using natural cooling and cooling, with low noise and high reliability;
System features:
1, three-phase three-wire voltage input, three-phase current balance, with AC over-voltage protection;
2, wide voltage input range 304V ~ 456V, strong adaptability;
3, using soft switching technology, high efficiency, electromagnetic compatibility Good performance, small size, light weight, high module performance;
4, module with hot plug technology, easy to maintain;
5, using stepless current limit design, battery charging current limit accuracy;
6, with overvoltage, Automatic protection function, alarm measures such as current limiting, short circuit, parallel, over temperature, over current, etc., with remote control, telemetry, remote signaling, remote adjustment function;
7. Built-in CPU distributed control mode, with convenient communication and strong anti-interference ability;
8, independent LED display, can query the module's voltage, current, address and fault information;
9, the module has hardware current sharing unit circuit, the system expansion becomes simple;
10, using natural cooling and cooling, with low noise and high reliability;
Tình trạng sản phẩm:
System parameters:
First, AC input
1, three-phase input rated voltage: 380V, 50HZ
2, voltage variation range: 380V ± 20%
3, frequency variation range: 50HZ ± 10%
two, DC transmission Output
1, output rating: 10A/220V (GZ22010-3)
20A/110V (GZ11020-3)
2, voltage adjustment range: 180V-286V (GZ22010-3)
90V-143V (GZ11020-3)
3, output current limit Range: 5%-105% × rated current
4, voltage regulation accuracy: ≤ 0.5%
5, steady flow accuracy: ≤ 0.5%
6. Ripple coefficient: ≤0.5%
7. Conversion efficiency: ≥95% (full load output)
8. Dynamic response: recovery time ≤200цS at 20% load transition to 80% load, overshoot ≤±2%
9 Audible noise: ≤55dB
10. Working environment temperature: -5°C--+45°C
III. Insulation
1. Insulation resistance: AC voltage of 500V/50HZ is applied between DC part and system part and ground. Insulation resistance> 2MΩ.
2. Insulation strength: between the AC part and the DC part and the casing, 50HZ of 2KV AC voltage is applied between the DC part and the casing, no breakdown for one minute, no flashover.
Four, four remote functions
1, remote control: open / shutdown, both floating charge
2, remote adjustment: output voltage, output current limit are continuously adjustable
3, telemetry: output voltage, output current
4, remote signal: open / shutdown state, Working state
5, structural appearance
1, module size: (width × height) 160 × 300 (panel size), (width × height × depth) 131 × 282 × 418 (box size)
2, module weight: 12.7Kg
First, AC input
1, three-phase input rated voltage: 380V, 50HZ
2, voltage variation range: 380V ± 20%
3, frequency variation range: 50HZ ± 10%
two, DC transmission Output
1, output rating: 10A/220V (GZ22010-3)
20A/110V (GZ11020-3)
2, voltage adjustment range: 180V-286V (GZ22010-3)
90V-143V (GZ11020-3)
3, output current limit Range: 5%-105% × rated current
4, voltage regulation accuracy: ≤ 0.5%
5, steady flow accuracy: ≤ 0.5%
6. Ripple coefficient: ≤0.5%
7. Conversion efficiency: ≥95% (full load output)
8. Dynamic response: recovery time ≤200цS at 20% load transition to 80% load, overshoot ≤±2%
9 Audible noise: ≤55dB
10. Working environment temperature: -5°C--+45°C
III. Insulation
1. Insulation resistance: AC voltage of 500V/50HZ is applied between DC part and system part and ground. Insulation resistance> 2MΩ.
2. Insulation strength: between the AC part and the DC part and the casing, 50HZ of 2KV AC voltage is applied between the DC part and the casing, no breakdown for one minute, no flashover.
Four, four remote functions
1, remote control: open / shutdown, both floating charge
2, remote adjustment: output voltage, output current limit are continuously adjustable
3, telemetry: output voltage, output current
4, remote signal: open / shutdown state, Working state
5, structural appearance
1, module size: (width × height) 160 × 300 (panel size), (width × height × depth) 131 × 282 × 418 (box size)
2, module weight: 12.7Kg
TÂN THÀNH CAM KẾT
- Sản phẩm, hàng hóa chính hãng.
- Giá cả cạnh tranh.
- Dịch vụ chăm sóc khách hàng tận tâm.
Thông Tin Công Ty
Chính sách và quy định
Đã thông báo
Hỗ trợ khách hàng
THÔNG TIN LIÊN HỆ:
-------------------------------
CÔNG TY TNHH THIẾT BỊ CÔNG NGHIỆP TTH
Trụ sở: số 124 ngõ 79 Yên Hoà-Cầu giấy-HN
Kinh doanh 1 : 0816.861.515
Kinh doanh 2 : 0836.861.515
Email: tthkinhdoanh@gmail.com
Email: tthkinhdoanh01@gmail.com
