- Bộ lập trình PLC, cáp lập trình
- Màn hình HMI
- Cảm biến, phụ kiện
- Biến tần, khởi động mềm
- Máy cắt, Aptomat, khởi động từ
- Thiết bị đo lường, bảo vệ
- Thiết bị công nghiệp, tự động hóa
- Thủy lực, khí nén, van công nghiệp
- Motor, Servo motor, Servo Amplifier
- Thyristor, Module, SCR, SSR, Diode
- Phụ kiện tủ điện và vỏ tủ điện
- Cáp điện, ống bảo vệ cáp
- Thiết bị điện trung thế, truyền tải
- Thiết bị chống sét, kim thu sét
- Dụng cụ cầm tay, dụng cụ tool
- ATS, UPS, tụ bù, cuộn kháng
-
Thiết bị ngành xi măng, thép, nhiệt điện
-
Thiết bị thanh lí-hàng tháo máy
BỘ HIỂN THỊ ĐỘ RUNG PROVIBTECH TM101-A08-B01-C00-D00-E00-G00
Condition monitoring
★ Monitor the absolute vibration of the rotating machinery, such as the vibration of the housing, the vibration of the bearing bush, the vibration of the frame and so on.
★ Monitor the vibration caused by imbalance of the rotor, misalignment, loose parts, damage of rolling bearings, gear damage, etc.
Ø Measurement parameters
★ Vibration speed, acceleration, and displacement values.
Ø Unit type
★ all kinds of rotating machinery. Such as fans, compressors, motors, pumps, gear boxes, turbines and so on.
★ Particularly suitable for the technical transformation of the old unit.
Ø probe installation requirements
★ Just make a φ 30mm platform on the housing , open a M6 screw hole, and fix the probe on the screw hole without any operation inside the machine.
Ø output interface
★ having . 4 - 20mA or . 1 - 5V active output terminal ( " 4-20mA " a " + " and " - ").
★ The spot LED shows the machine running status (instrument working status OK , alarm Alert , interlockDanger ).
★ Isolated two-stage alarm relay output terminal SPDT ( 6 output terminals of " ALERT " and "DANGER " ).
★ Field alarm reset button, remote alarm reset terminal (" RESET ") / alarm bypass terminal (" RESET " and " COM ").
★ It can be displayed on site (requires TM0200 ) and shows the vibration value through PLC and DCS .
★ Suitable for various explosion-proof occasions (explosion-proof barrier TM0401 is required ).
★ buffer output of the original signal, direct docking status monitoring instrument (" BUF OUT " coaxial cable interface).
★ 24VDC , 220VAC or 110VAC power supply, 220VAC or 110VAC option is isolated power supply.
★ Monitor the absolute vibration of the rotating machinery, such as the vibration of the housing, the vibration of the bearing bush, the vibration of the frame and so on.
★ Monitor the vibration caused by imbalance of the rotor, misalignment, loose parts, damage of rolling bearings, gear damage, etc.
Ø Measurement parameters
★ Vibration speed, acceleration, and displacement values.
Ø Unit type
★ all kinds of rotating machinery. Such as fans, compressors, motors, pumps, gear boxes, turbines and so on.
★ Particularly suitable for the technical transformation of the old unit.
Ø probe installation requirements
★ Just make a φ 30mm platform on the housing , open a M6 screw hole, and fix the probe on the screw hole without any operation inside the machine.
Ø output interface
★ having . 4 - 20mA or . 1 - 5V active output terminal ( " 4-20mA " a " + " and " - ").
★ The spot LED shows the machine running status (instrument working status OK , alarm Alert , interlockDanger ).
★ Isolated two-stage alarm relay output terminal SPDT ( 6 output terminals of " ALERT " and "DANGER " ).
★ Field alarm reset button, remote alarm reset terminal (" RESET ") / alarm bypass terminal (" RESET " and " COM ").
★ It can be displayed on site (requires TM0200 ) and shows the vibration value through PLC and DCS .
★ Suitable for various explosion-proof occasions (explosion-proof barrier TM0401 is required ).
★ buffer output of the original signal, direct docking status monitoring instrument (" BUF OUT " coaxial cable interface).
★ 24VDC , 220VAC or 110VAC power supply, 220VAC or 110VAC option is isolated power supply.
Tình trạng sản phẩm:
Condition monitoring
★ Monitor the absolute vibration of the rotating machinery, such as the vibration of the housing, the vibration of the bearing bush, the vibration of the frame and so on.
★ Monitor the vibration caused by imbalance of the rotor, misalignment, loose parts, damage of rolling bearings, gear damage, etc.
Ø Measurement parameters
★ Vibration speed, acceleration, and displacement values.
Ø Unit type
★ all kinds of rotating machinery. Such as fans, compressors, motors, pumps, gear boxes, turbines and so on.
★ Particularly suitable for the technical transformation of the old unit.
Ø probe installation requirements
★ Just make a φ 30mm platform on the housing , open a M6 screw hole, and fix the probe on the screw hole without any operation inside the machine.
Ø output interface
★ having . 4 - 20mA or . 1 - 5V active output terminal ( " 4-20mA " a " + " and " - ").
★ The spot LED shows the machine running status (instrument working status OK , alarm Alert , interlockDanger ).
★ Isolated two-stage alarm relay output terminal SPDT ( 6 output terminals of " ALERT " and "DANGER " ).
★ Field alarm reset button, remote alarm reset terminal (" RESET ") / alarm bypass terminal (" RESET " and " COM ").
★ It can be displayed on site (requires TM0200 ) and shows the vibration value through PLC and DCS .
★ Suitable for various explosion-proof occasions (explosion-proof barrier TM0401 is required ).
★ buffer output of the original signal, direct docking status monitoring instrument (" BUF OUT " coaxial cable interface).
★ 24VDC , 220VAC or 110VAC power supply, 220VAC or 110VAC option is isolated power supply.
★ Monitor the absolute vibration of the rotating machinery, such as the vibration of the housing, the vibration of the bearing bush, the vibration of the frame and so on.
★ Monitor the vibration caused by imbalance of the rotor, misalignment, loose parts, damage of rolling bearings, gear damage, etc.
Ø Measurement parameters
★ Vibration speed, acceleration, and displacement values.
Ø Unit type
★ all kinds of rotating machinery. Such as fans, compressors, motors, pumps, gear boxes, turbines and so on.
★ Particularly suitable for the technical transformation of the old unit.
Ø probe installation requirements
★ Just make a φ 30mm platform on the housing , open a M6 screw hole, and fix the probe on the screw hole without any operation inside the machine.
Ø output interface
★ having . 4 - 20mA or . 1 - 5V active output terminal ( " 4-20mA " a " + " and " - ").
★ The spot LED shows the machine running status (instrument working status OK , alarm Alert , interlockDanger ).
★ Isolated two-stage alarm relay output terminal SPDT ( 6 output terminals of " ALERT " and "DANGER " ).
★ Field alarm reset button, remote alarm reset terminal (" RESET ") / alarm bypass terminal (" RESET " and " COM ").
★ It can be displayed on site (requires TM0200 ) and shows the vibration value through PLC and DCS .
★ Suitable for various explosion-proof occasions (explosion-proof barrier TM0401 is required ).
★ buffer output of the original signal, direct docking status monitoring instrument (" BUF OUT " coaxial cable interface).
★ 24VDC , 220VAC or 110VAC power supply, 220VAC or 110VAC option is isolated power supply.
TÂN THÀNH CAM KẾT
- Sản phẩm, hàng hóa chính hãng.
- Giá cả cạnh tranh.
- Dịch vụ chăm sóc khách hàng tận tâm.
Thông Tin Công Ty
Chính sách và quy định
Đã thông báo
Hỗ trợ khách hàng
THÔNG TIN LIÊN HỆ:
-------------------------------
CÔNG TY TNHH THIẾT BỊ CÔNG NGHIỆP TTH
Trụ sở: số 124 ngõ 79 Yên Hoà-Cầu giấy-HN
Kinh doanh 1 : 0816.861.515
Kinh doanh 2 : 0836.861.515
Email: tthkinhdoanh@gmail.com
Email: tthkinhdoanh01@gmail.com
