AM1-80/2
AM1-80 2 modular power supply surge protector is designed according to IEC and GB standards, AM series low voltage power distribution system surge protector has strong surge discharge capability, the maximum discharge current per bit is 80kA (8 20μs), suitable for For the protection of low-voltage power distribution systems at all levels, a variety of combinations can be selected according to different power distribution systems (TT TN IT).
- High energy surge protection
- Built-in instantaneous overcurrent disconnect device
- Remote signaling alarm interface
- Pluggable Replacement Modules
- detection instruction
- The maximum discharge current of a single module is 80kA (8/20μs)
- Standard Modular Installation
- Built-in thermal circuit breaker
- Response speed: 10-9 seconds
- Plug-in foolproof design
Product performance parameters: model | AM1-80/2 |
SPD port | one port |
SPD category | Combination |
Power Systems | TT-TN-IT |
Rated voltage Un | 220V AC 50~60Hz |
Maximum continuous operating voltage Uc | 385V AC 50~60Hz |
Nominal discharge current In(8/20μs) | 40kA |
Maximum discharge current Imax (8/20μs) | 80kA |
Protection level Up (8/20μs) | <2.4kV |
It is recommended to connect an overcurrent protection device in series | 63A/35kA |
size | 2mods,DIN43880 |
Failure indication | Green: Normal Red: Failed |
Installation lead cross-sectional area | 6-25mm 2 |
Installation method | 35mm standard rail (EN50022/DIN46277-3) |
Working temperature | -40/85℃ |
Shell material | Plastic, conforms to UL94 V-0 |
Shell protection class | IP20 |
Certification | CE RoHS |
Remote signaling alarm | Normally open/normally closed contact terminal (optional) |
Cross-sectional area of remote signaling terminal | Up to 1.5mm 2 solid wire/cord |
*Product parameters are subject to the actual product manual.