Công ty TNHH công nghệ số Tân Thành

Đồng hồ hiển thị nhiệt đô đa kênh, XMD52216, XMD52208, XMD50208

  • Đăng ngày 08-08-2019 04:21:06 PM - 33 Lượt xem
  • Mã sản phẩm: XMD52216, XMD52208, XMD50208
  • ★ Scope of application

      It is applicable to the patrol monitoring and alarm control of various industrial process parameters such as shaft temperature, pipeline air temperature and furnace temperature.


    Tình trạng sản phẩm:


    dce6fb062d41ca1f9350

    ★ 
    Scope of application

      It is applicable to the patrol monitoring and alarm control of various industrial process parameters such as shaft temperature, pipeline air temperature and furnace temperature.

    ★ Features

    ※ Universal input signal   

           It can be applied to any of the following input signals with simple software and hardware settings.

    l       Thermal resistance: Pt100, Pt100.0, Pt10, Cu50, Cu100.

    l       Thermocouple: K, E, S, B, J, R, T, N, with automatic cold junction temperature compensation.

    l       Standard signal: 0-10mA, 4-20mA, 0-5V, 1-5V, linear or square signal.

    l       Remote transmission pressure gauge: 30-350 W , the signal deviation can be corrected by the on-site button, that is, ready to use.

    l       General linear non-standard signal: 0-60mV or 0-60mV or more 0-5V or any signal can be set to use immediately.

    l       Other special customized non-standard input signals.

    ※ Single-chip intelligent   

    l       Zero point and magnification can be automatically tracked, and there is no drift in long-term operation.

    l       All parameters can be set by pressing the button.

    ※ Alarm relay   

    l There are       up to two common alarm relays, and the common alarm relay has two alarm modes that can be selected by pressing the button.

    l       “Common” alarm: The relay will act as long as any channel generates an alarm.

    l       “Specified channel”: The relay will only operate if an alarm is generated on a specified channel.

    l       Each channel alarm value and alarm hysteresis can be set separately.

    ※ There are also road and lower limit alarm indicators on the 24 circuit inspection instrument panel.   

    ※ With RS485/ RS232/Modem isolated communication interface   

    ※ With serial print port, it can be used with our PRN5000 disk printer.   

    ※ 8/16 loop inspection instrument can be equipped with DT500 each channel alarm control expansion box, each channel alarm control expansion box each box has 16 alarm control output relays, there are 4 types available.   

    l       DT501:1-8 channel upper and lower limit alarm control output expansion box.

    l       DT502: 9-16 channel upper and lower limit alarm control output expansion box.

    l       DT503: 1-16 channel upper limit alarm control output expansion box.

    l       DT504: 1-16 channel lower limit alarm control output expansion box.

    ★ XMD5000 series / DT500 series selection table 

    Spectrum

    Description

     XMD 

     

    Multi-channel inspection instrument

    Design sequence

    5

     

    Switching power supply

    Control type

     

    0

     

    Without control alarm

     

    1

     

    With a common upper or lower alarm output

    2

     

    With common upper and lower alarm output

     

    3

     

    With each road, lower limit alarm output (with DT500)

    input signal

    Types of

     

    1

     

    Adapter thermocouple

    2

     

    Adapter thermal resistance

    3

     

    Adapter Hall Transmitter

    4

     

    Adapted to remote pressure gauge

    5

     

    Adapt DC 0~10mA input

    6

     

    Adapt DC 4~20mA input

    7

     

    Adapt to DC 0~5V input

    8

     

    Adapt to DC 1~5V input

    U

     

    Universal index number input

    Input

    Number of channels

     

    08

     

    Eight channels

    16

     

    Sixteen channels

    twenty four

     

    Twenty-four channels

    external structure

    Types of

         

    160×80×150mm horizontal table

    V

     

    80×160×150mm vertical table

    F

    Unable to enter universal index number

    96×96×110mm square meter (only 8 channels have this option)

    Power supply

    Types of

         

    Power supply 220VAC

    D

     

    Power supply 24VDC

    Communication Interface

    Types of

         

    Without communication interface

    RS232

     

    RS232 isolated communication interface

    RS485

     

    RS485 isolated communication interface

    MODEM

     

    Modem isolation interface

    PRN

     

    Serial standard print interface

    Alarm Output

    Expansion box

    8 channels and 16 channels have this function at the same time

    -DT501

    1-8 channel upper and lower limit alarm control output expansion box

    -DT502

    9-16 channel upper and lower limit alarm control output expansion box

    Only 16 channels have this function

    -DT503

    1-16 channel upper limit alarm control output expansion box

    -DT504

    1-16 channel lower limit alarm control output expansion box

    Special function code

     

     □□□□

    0000 means no special function code

         

     



    TÂN THÀNH CAM KẾT

    • Sản phẩm, hàng hóa chính hãng.
    • Giá cả cạnh tranh.
    • Dịch vụ chăm sóc khách hàng tận tâm.

    Thông Tin Công Ty

    Đã thông báo

     


    THÔNG TIN LIÊN HỆ
    CTY TNHH CÔNG NGHỆ SỐ TÂN THÀNH [Bản đồ]
    Trụ sở công ty: Số 189, Nguyễn Văn Linh, P. Kênh Dương, Q, Lê Chân, TP. Hải Phòng
    VPGD: Số 165-Thiên Lôi, P Vĩnh Niệm, Q Lê Chân. TP Hải Phòng
    VPĐD: Số 191- P Chùa Láng. Q Đống Đa. TP Hà Nội
    Tel: 0225.8830.305  Fax: 0225.8830.305
    Kinh doanh 1: 091.797.1515
    Kinh doanh 2: 083.797.1515
    Kinh doanh 3: 091.686.1515
    Website: http://tanthanhtech.com/
    Website: http://vienthongtanthanh.com/
    Website: http://tanthanh-automation.com/
    Email: tanthanhdigitech@gmail.com

  • Kết nối với chúng tôi