Cuộn hút máy đóng bao MQM4-25-080-F FW YFA 220V

Đăng ngày 20-09-2018 11:44:54 AM - 504 Lượt xem

Mã sản phẩm: MQM4-25-080-F FW YFA 220V

MQM4 series AC analog traction electromagnet is a mechatronics product developed and developed by our company. This product adopts a new design, and uses the direct electromagnet to simulate the running curve of the AC electromagnet with the combination of traditional electromagnet theory and modern electronic technology. Because the operation of the common AC traction electromagnet is a function of the air gap, that is, the operating current is determined by the size of the air gap, which causes the disadvantage that the ordinary AC electromagnet cannot work under overload conditions. The working current of the AC analog traction electromagnet is a function of the amount of motion of the armature per unit time, that is, the working current is completely determined by the armature motion state, so it has good overload characteristics. The product has the advantages of stable operation, no noise and good overload performance of the DC electromagnet, and has the advantages of large traction force of the AC electromagnet, simple control and long stroke. The circuit module with intelligent function overcomes the shortcomings of overloading and burning of the AC electromagnet. During the use, if the armature is stuck for various reasons, under the control of the module, the electromagnet automatically switches to the working state to ensure its long-term reliable operation. Another function of the intelligent circuit module is to automatically adjust the input electric energy according to the weight of the load during the operation of the electromagnet, and the energy saving effect is obviously superior to that of the ordinary electromagnet.
　　MQM4-25-80 AC analog traction electromagnet is used in rotary cement packaging machines, punching machines, shearing machines, lifting, metallurgy, mining, construction machinery and automation systems for remote operation of traction control devices.

First, the model meaning

□: Meaning
F: Jog operation, no hold function
Y: Controller split installation
K: With computer interface
A: Derived product
W: Indicates maintainable

Second, technical parameters

Product number	Rated voltage V	Rated stroke mm	Rated suction N	Operating frequency / hour	Starting current A
MQM4-25-50	220	25	50	600	2
MQM4-25-50	380	25	50	600	1.3
MQM4-25-80	220	25	80	600	5
MQM4-25-80	380	25	80	600	3
MQM4-25-150	220	25	150	300	8
MQM4-25-150	380	25	150	300	5

Third, the shape and installation size
1, shape

2, installation size

Model	A	B	D1	D2	D3	H1	H2	H3
MQM4-25-050	70	52	20/25	56	6	117	112	95
MQM4-25-080	83	62	24/33	68	8	135	125	105
MQM4-25-080A	83	62	24/33	68	8	122	112	92
MQM4-25-150	110	84	40/48	92	8	175	162	135

Tình trạng sản phẩm:

4. Normal working conditions and installation conditions
1. Ambient air temperature
a) The upper limit of ambient air temperature does not exceed +40 °C;
b) The average value of ambient air temperature within 24 h does not exceed +35 °C;
c) The lower limit of ambient air temperature is not lower than - 15 ° C.
2. The altitude of the installation site should not exceed 3000m.
3. The relative humidity of the atmosphere does not exceed 50% when the ambient air temperature is +40 °C.
4. Installation conditions
a) The product can be installed in any direction in principle, and the direction of the reaction must be coincident with the axis of the armature. The deviation should not exceed ±15°
b) The longest service life when installing the electromagnet in the vertical direction (when the armature is up When moving, the suction of the electromagnet should include the weight of the armature).
c) installed in places where there is no severe shaking and impact;
d) installed in a medium without explosion hazard, and there is no gas and dust (including conductive dust) in the medium that is sufficient to corrode metal and damage insulation;
e) installed in no rain or snow The place of invasion.

V. Instructions for ordering
1. The suction force of the selected electromagnet should be similar to the reaction force of the electromagnet by the use mechanism. It should not be too disparate, otherwise the mechanical life of the electromagnet will be reduced.
3. The electromagnet should be placed in a warehouse where the air is circulated and the temperature is not higher than +40 ° C and not lower than -5 ° C.
4. When installing the electromagnet, it should be noted that the reaction force of the mechanism connected to the electromagnet must coincide with the center line of the armature. Otherwise, noise will occur, and the coil will be burned even due to friction and overheating of the armature.
5. The electromagnet can reliably pull in when the power supply voltage is ≥85% of rated value and the stroke is rated.

: Bộ chuyển đổi tín hiệu cân weight transmitter LCT6-JPA0101 C&V AD103C AED9101D Liên hệ

: Bộ chuyển đổi tín hiệu cân high-precision transmitter TI-1500DM, TI-500ESS Liên hệ

: Công tắc báo rách băng tải ZLK-1 automatic tear switch belt tear switch ZL-II longitudinal tear detector DB-100 Liên hệ

: Công tắc báo tắc phễu bồn bin KBW220 coal blockage switch LDM-Y explosion-proof chute blockage switch DS-I Liên hệ

: Công tắc báo tắc phễu bồn bin LDM-X round chute clogging switch DS-I chute clogging detector KBW220 clogging switch XLDS-I Liên hệ

: Cảm biến cảm ứng NJ5-18GK-N-150 NJ8-18GK-N-150 NJ15-30GK-N-150 NJ5-30GK-S1N NJ5-30GK-S1N-5M Liên hệ

: Cảm biến trọng lượng pressure weighing load cell DYLY-103 batching scale 5kg 10kg 20kg 30kg 50kg 100kg 200kg 300kg 500kg 1000kg 1500kg 2000kg 3000kg 5000kg Liên hệ

: Cảm biến áp lực YS-1100B YS-1100B PT-306-16 YS-PT1100B Liên hệ

: Công tắc hành trình LX5-15B LX5-15Z LX5-15L LX5-15N LX5-15K 15D LX5-15H Liên hệ

: Bộ chuyển đổi tín hiệu nhiệt độ Rosemount Temperature Transmitter 248HANANONS 248HANAU1NS 248RANA 248HAK5A2NS 248HAE1U2NS 248HANAN0C4Q4 248HAI5U2NS Liên hệ

: Camera công nghiệp Basler acA2500-14gm acA2500-14gc industrial camera 5 million pixels Liên hệ

: Camera công nghiệp Hikvision Industrial Camera MV-CS050-10GM/GC 5 million black and white/color 2/3" Gigabit Ethernet Liên hệ

TÂN THÀNH CAM KẾT

Sản phẩm, hàng hóa chính hãng.
Giá cả cạnh tranh.
Dịch vụ chăm sóc khách hàng tận tâm.

Thông Tin Công Ty

Giới thiệu về chúng tôi

Chính sách và quy định

Đã thông báo

Hỗ trợ khách hàng

THÔNG TIN LIÊN HỆ:
-------------------------------
CÔNG TY TNHH THIẾT BỊ CÔNG NGHIỆP TTH
Trụ sở: số 124 ngõ 79 Yên Hoà-Cầu giấy-HN
Kinh doanh 1 : 0816.861.515
Kinh doanh 2 : 0836.861.515
Email: tthkinhdoanh@gmail.com
Email: tthkinhdoanh01@gmail.com

Cuộn hút máy đóng bao MQM4-25-080-F FW YFA 220V

TÂN THÀNH CAM KẾT

Kết nối với chúng tôi