Biến tần T-Verter N2-203-H ,Taian N2 inverter 2.2KW 220V N2-203-H (3HP) Brand new unpackaged

Đăng ngày 16-09-2018 11:58:13 PM - 570 Lượt xem

Mã sản phẩm: N2 inverter 2.2KW 220V N2-203-H (3HP)

Taian N2 inverter 2.2KW 220V N2-203-H (3HP) Brand new unpackaged
Taian N2 Inverter : Universal
rated voltage, power range:
220V single / three phase (0.4KW-22KW)
380V three-phase (0.75KW-22KW)
Features:
· Small size, low noise
· All areas detection protection
· 8-speed control and 7-stage programmable repeat operation
· With RS232/RS485 communication function
· CE/UL/cUL/Ctick certification pass
· NEMA4 protection grade (ordered product)

Tình trạng sản phẩm:

TECO Taian inverter S310 replaces E2
TECO Taian inverter N310 replaces N2
TECO Taian inverter T310 replaces N310

General specifications:

Inverter model N2-□□□-××		2P5	201	202	203	205	208	210	215	220	230
Horsepower (HP)		0.5	1	2	3	5	7.5	10	15	20	30
Applicable motor capacity KW		0.4	0.75	1.5	2.2	3.7	5.5	7.5	11	15	twenty two
Rated current A		3.1	4.5	7.5	10.5	17.5	26	35	49	64	87
Rated capacity KVA		1.2	1.7	2.9	4.0	6.7	9.9	13.3	18.7	24.4	87
Weight (Kg)		1.4	1.4	2.5	4.0	4.0	6.8	7.1	11.3	11.7	33.2
Allow instantaneous stop time (seconds)		1.0	1.0	2.0	2.0	2.0	2.0	2.0	2.0	2.0	2.0
Input voltage (50/60Hz±5%)		Single-phase or three-phase 200~240V 10%, 50/60HZ 5%, 205 (inclusive) or more for three-phase input
The output voltage		Three-phase 200~240V (corresponding to input voltage)
control method		Approximate sine wave PWM control
Inverter model N2-□□□-××		401	402	403	405	408	410	415	420	430
Horsepower (HP)		1	2	3	5	7.5	10	15	20	30
Applicable motor capacity KW		0.75	1.5	2.2	3.7	5.5	7.5	11	15	twenty two
Rated current A		2.3	3.8	5.2	8.8	13	17.5	25	32	48
Rated capacity KVA		1.7	2.9	4.0	6.7	9.9	13.3	19.1	24.4	36.6
Allow instantaneous stop time (seconds)		1.0	1.0	2.0	2.0	2.0	2.0	2.0	2.0	2.0
Weight (Kg)		2.4	2.5	3.8	4.0	7.0	7.3	12.3	12.5	13.5
Input voltage (50/60Hz±5%)		Three-phase 380 ~ 480V ± 10%
The output voltage		Three-phase 380 ~ 480V (corresponding to input voltage)
control method		Approximate sine wave PWM control
The frequency of the control system	range	0.1～400Hz
	Precision	Digital formula: 0.01% (-10 ~ 40 °C); analog: 0.4% (25 10 ° C)
	Set resolution	Digital type: 0.01Hz (Note 1); Analog: 0.06Hz / 60Hz
	Output resolution	0.01Hz
	Keyboard frequency setting method	Can be set directly with ▲▼ or with the knob (VR) on the keyboard.
	External signal setting method	1. External variable resistor / 0-5V / 0-10V / 0-20mA / 5-0V / 10-0V / 20-0mA 2. With the terminal block (TM2) multi-function contact for rise / fall control or speed Control or program automatic control
	Other functions	Frequency upper/lower limit, starting frequency, three-stage skip frequency can be set individually
A general control system	Carrier frequency	1-12KHz
	Acceleration and deceleration control	2-stage acceleration/deceleration time (0.1-3600 seconds) and 2-segment S-curve
	Voltage/frequency curve	1 programmable curve, 18 fixed curves
	Torque control	Torque boost level can be set
	Multi-function input	16 functions, 32 options
	Multi-function output	6 functions, 12 options
	Other functions	Automatic voltage adjustment (AVR), slip compensation, deceleration stop or natural stop, automatic reset and restart, brake frequency / voltage / time can be activated by SPESESEARCH or general mode, 3 WIRE operation control.
Protective function		Overload protection, over voltage, under voltage, instantaneous power failure restart, acceleration/deceleration/running stall prevention; inverter output short circuit protection, initial ground protection + zero phase CT protection, heat sink overheat protection; over torque detection, fault Contact control, reverse limit, direct start and fault reset after power on, parameter lock
Operating keyboard		Can display frequency / speed / line speed / DC voltage / output voltage / current / inverter steering / inverter parameters / fault record / program version
Communication control		1. Can communicate by RS232 or RS485 (need to be used with accessories) 2. Can be used for 1 to 1 or 1 to many (RS485)
Operating temperature		-10～40°C
humidity		0 to 95% relative humidity (no condensation)
vibration		Below 0.5G
LVD specification		EN50178
Protection level		IP 20/NEMA4 (10Hp (inclusive) below)
Security Level		UL 508C
Note 1: The resolution above 100Hz is 0.1Hz when controlled by the operation panel; when it is controlled by computer (PC) or programmable controller (PLC), it can be up to 0.01Hz Note 2:200V level N2-205 (including ) No EMC specifications above

: Modul PLC 140DDI84100, 140ACI03000, 140ACO13000 Liên hệ

: Allen Bradley PLC SLC500 Input Module 1746-IM16 Liên hệ

: Allen Bradley PLC SLC500 Output Module 1746-OW16 16 CH-RELAY Liên hệ

: Cầu đấu PLC Siemens 20 40-pin 6ES7392 6ES7 392-1AJ00-0AA0, 392-1AM00-0AA0 Liên hệ

: Modun PLC, Siemens module 6ES7 Siemens PLC SM321 321-1BH02-0AA0 Liên hệ

: PLC MITSUBISHI FX1N-40MR-ES/UL Liên hệ

: Aptomat thanh lý ABB Tmax, In=250A Liên hệ

: Công tắc tơ thanh lý, LC1D5011M5C 220V, LC1-D5011M5C 220V Liên hệ

: Công tắc tơ thanh lý, LC1D9511M5C 220V, LC1-D9511M5C 220V Liên hệ

: Role nhiệt thanh lý, LR9F5369 90-150A Liên hệ

: Công tắc tơ, khởi động từ hàng cũ, LC1D245M7C 220V, LC1-D245M7C 220V Liên hệ

: Công tắc tơ, khởi động từ hàng cũ, LC1D205M7C 220V, LC1-D205M7C 220V Liên hệ

TÂN THÀNH CAM KẾT

Sản phẩm, hàng hóa chính hãng.
Giá cả cạnh tranh.
Dịch vụ chăm sóc khách hàng tận tâm.

Thông Tin Công Ty

Giới thiệu về chúng tôi

Chính sách và quy định

Đã thông báo

Hỗ trợ khách hàng

THÔNG TIN LIÊN HỆ:
-------------------------------
CÔNG TY TNHH THIẾT BỊ CÔNG NGHIỆP TTH
Trụ sở: số 124 ngõ 79 Yên Hoà-Cầu giấy-HN
Kinh doanh 1 : 0816.861.515
Kinh doanh 2 : 0836.861.515
Email: tthkinhdoanh@gmail.com
Email: tthkinhdoanh01@gmail.com

Biến tần T-Verter N2-203-H ,Taian N2 inverter 2.2KW 220V N2-203-H (3HP) Brand new unpackaged

TÂN THÀNH CAM KẾT

Kết nối với chúng tôi