Công ty TNHH công nghệ số Tân Thành

Danh Mục Sản Phẩm


Công tắc tơ/CONTACTOR LC1D11500M7C AC220V
  • Công tắc tơ/CONTACTOR LC1D11500M7C AC220V

Công tắc tơ/CONTACTOR LC1D11500M7C AC220V

  • Đăng ngày 11-04-2018 04:05:30 PM - 1078 Lượt xem
  • Mã sản phẩm: LC1D11500M7C AC220V
    • Product Series TeSys  
    product name D  
    product type Contactor  
    Product short name LC1D  
    Contactor application area Applied to the making and breaking normal start squirrel cage motor 
    is applied to the AC load power factor greater than 0.95 in equal    		  
    Use category AC-1 
    AC-4 
    AC-3    		  
    Number of poles 3P  
    Loop contact type 3 NO  
    Rated operating current [Ie] 200 A (AC-1, Ue<= 440 V, θ<= 60 °C) 
    115 A (AC-3, Ue<= 440 V, θ<= 60 °C)    		  
    Control circuit voltage 220 V, AC 50/60 Hz  
    Auxiliary contact type Without  
    Additional information
    Rated operating voltage [Ue] Power circuit: <= 300 V 
    power circuit: <= 1000 V    		  
    Motor power (kW) 30 kW (220/240 V) AC-3 
    55 kW (380/400 V) AC-3 
    59 kW (415/440 V) AC-3 
    75 kW (500 V) AC-3 
    80 kW (660/690 V) AC-3 
    18.5 kW (400 V) AC-4 
    75 kW (1000 V) AC-3    		  
    Electrical life 1.4 kA2.s (AC-3) 
    0.5 kA2.s (AC-1) 
    0.9 kA2.s (AC-3)    		  
    Mechanical life 8 kA2.s  
    Maximum operating frequency 2400 times per hour (ambient temperature <= 60 °C)  
    Action time Breaking: 6...20 ms 
    Closed: 20...50 ms    		  
    Control voltage limit Release: 0.3...0.5 Uc 50/60 Hz 
    Operation: 0.8...1.15 Uc 50/60 Hz    		  
    (~50Hz hold) power consumption (VA) 2...18 VA 50 Hz 
    2...18 VA 60 Hz    		  
    Appointment of heating current [Ith] Power circuit: 200 A (θ<= 60 °C)  
    Average impedance 0.6 mΩ (Ith 50 Hz)  
    Heat dissipation 3...8 W (50/60 Hz)  
    Rated short-time withstand current [Icw] Power circuit: 1100 A, Duration: 1 s (<= 40 °C) 
    Power circuit: 950 A, Duration: 10 s (<= 40 °C) 
    Power circuit: 550 A, Duration: 1 minute (<= 40 °C) 
    Power Circuit: 250 A, Duration: 10 minutes (<= 40 °C)    		  
    Fuses for use with relays Power supply circuit: gG 250 A, type 1, U<= 690 V 
    power supply circuit: gG 200 A, type 2, U<= 690 V    		  
    Overvoltage category III  
    Rated insulation voltage [Ui] Power circuit: 1000 V, in accordance with IEC 60947-4-1  
    Surge suppression module No built-in surge suppression module  
    Installation method Rail mounting 
    base plate installation    		  
    Wiring capability Control circuit: screw-fastened, 2 cable 1...2.5 mm2, flexible cable, with twisted wire terminal. 
    Control circuit: screw-fastened, 1 cable 1...2.5 mm2, soft wire, without twisting wire terminal. 
    Control Circuit: screw-fastened, 2 cable 1...2.5 mm2, flexible cable, without twisted wire terminal. 
    Control circuit: screw-fastened, 1 cable 1...2.5 mm2, flexible cable, with twisted wire terminal. 
    Control circuit : Bolt-fastened, 1 cable 1...2.5 mm2, hard-wired, without twisted wire terminals. 
    Control circuit: screw-fastened, 2 cable 1...2.5 mm2, hard-wired, without twist-wire terminal. 
    Power circuit : Busbar terminals, hardwired, 5 x 25 mm 
    power supply circuit: Terminals, 1 cable 10...120 mm2 lug outer diameter Ø: 25 mm, flexible cord, without twisting wire terminals. 
    Power supply circuit: Terminals, 2 Cable 10...50 mm2 lug outside diameter Ø: 25 mm, cord, without twisting wire terminal. 
    Power supply circuit: Terminals, 1 Cable 10...120 mm2 Wiring outside diameter Ø: 25 mm, cord , with twisted wire terminals. 
    Power supply circuit: Terminals, 2 cable 10...50 mm2 lug outer diameter Ø: 25 mm, cord, with twisted wire terminals. 
    Power supply circuit: Terminal, 1 cable 10...120 mm² tab outer diameter Ø: 25 mm, hardwired, without Gu wire terminal. 
    power supply circuit: contact End, the cable 2 tab 10 ... 50 mm² outer diameter Ø: 25 mm, hardwired, without Gu wire terminal.    		  
    Tightening torque Power circuit: 12 Nm 
    power circuit: 12 Nm 
    control circuit: 1.2 Nm (No 2 cross screw) 
    control circuit: 1.2 Nm (Ø 6 flat ports)    		  
    height 158 mm  
    width 120 mm  
    depth 136 mm  
    Control loop characteristics AC 50/60 Hz  
    Rated impulse withstand voltage [Uimp] 8 kV (according to IEC 60947)  
    protection cap no  
    (~50Hz pull-in) power consumption (VA) 280...350 VA on...20°C 60 Hz 
    280...350 VA on...20°C 50 Hz    		  
    product weight 2.5 kg  
    Contactor compatibility features M2  
    model LC1D  
    surroundings
    Standards compliant IEC 60947-4-1 
    GB 14048.4    		  
    certified product CCC  

    Tình trạng sản phẩm:


    Product Series TeSys  
    product name D  
    product type Contactor  
    Product short name LC1D  
    Contactor application area Applied to the making and breaking normal start squirrel cage motor 
    is applied to the AC load power factor greater than 0.95 in equal    		  
    Use category AC-1 
    AC-4 
    AC-3    		  
    Number of poles 3P  
    Loop contact type 3 NO  
    Rated operating current [Ie] 200 A (AC-1, Ue<= 440 V, θ<= 60 °C) 
    115 A (AC-3, Ue<= 440 V, θ<= 60 °C)    		  
    Control circuit voltage 220 V, AC 50/60 Hz  
    Auxiliary contact type Without  
    Additional information
    Rated operating voltage [Ue] Power circuit: <= 300 V 
    power circuit: <= 1000 V    		  
    Motor power (kW) 30 kW (220/240 V) AC-3 
    55 kW (380/400 V) AC-3 
    59 kW (415/440 V) AC-3 
    75 kW (500 V) AC-3 
    80 kW (660/690 V) AC-3 
    18.5 kW (400 V) AC-4 
    75 kW (1000 V) AC-3    		  
    Electrical life 1.4 kA2.s (AC-3) 
    0.5 kA2.s (AC-1) 
    0.9 kA2.s (AC-3)    		  
    Mechanical life 8 kA2.s  
    Maximum operating frequency 2400 times per hour (ambient temperature <= 60 °C)  
    Action time Breaking: 6...20 ms 
    Closed: 20...50 ms    		  
    Control voltage limit Release: 0.3...0.5 Uc 50/60 Hz 
    Operation: 0.8...1.15 Uc 50/60 Hz    		  
    (~50Hz hold) power consumption (VA) 2...18 VA 50 Hz 
    2...18 VA 60 Hz    		  
    Appointment of heating current [Ith] Power circuit: 200 A (θ<= 60 °C)  
    Average impedance 0.6 mΩ (Ith 50 Hz)  
    Heat dissipation 3...8 W (50/60 Hz)  
    Rated short-time withstand current [Icw] Power circuit: 1100 A, Duration: 1 s (<= 40 °C) 
    Power circuit: 950 A, Duration: 10 s (<= 40 °C) 
    Power circuit: 550 A, Duration: 1 minute (<= 40 °C) 
    Power Circuit: 250 A, Duration: 10 minutes (<= 40 °C)    		  
    Fuses for use with relays Power supply circuit: gG 250 A, type 1, U<= 690 V 
    power supply circuit: gG 200 A, type 2, U<= 690 V    		  
    Overvoltage category III  
    Rated insulation voltage [Ui] Power circuit: 1000 V, in accordance with IEC 60947-4-1  
    Surge suppression module No built-in surge suppression module  
    Installation method Rail mounting 
    base plate installation    		  
    Wiring capability Control circuit: screw-fastened, 2 cable 1...2.5 mm2, flexible cable, with twisted wire terminal. 
    Control circuit: screw-fastened, 1 cable 1...2.5 mm2, soft wire, without twisting wire terminal. 
    Control Circuit: screw-fastened, 2 cable 1...2.5 mm2, flexible cable, without twisted wire terminal. 
    Control circuit: screw-fastened, 1 cable 1...2.5 mm2, flexible cable, with twisted wire terminal. 
    Control circuit : Bolt-fastened, 1 cable 1...2.5 mm2, hard-wired, without twisted wire terminals. 
    Control circuit: screw-fastened, 2 cable 1...2.5 mm2, hard-wired, without twist-wire terminal. 
    Power circuit : Busbar terminals, hardwired, 5 x 25 mm 
    power supply circuit: Terminals, 1 cable 10...120 mm2 lug outer diameter Ø: 25 mm, flexible cord, without twisting wire terminals. 
    Power supply circuit: Terminals, 2 Cable 10...50 mm2 lug outside diameter Ø: 25 mm, cord, without twisting wire terminal. 
    Power supply circuit: Terminals, 1 Cable 10...120 mm2 Wiring outside diameter Ø: 25 mm, cord , with twisted wire terminals. 
    Power supply circuit: Terminals, 2 cable 10...50 mm2 lug outer diameter Ø: 25 mm, cord, with twisted wire terminals. 
    Power supply circuit: Terminal, 1 cable 10...120 mm² tab outer diameter Ø: 25 mm, hardwired, without Gu wire terminal. 
    power supply circuit: contact End, the cable 2 tab 10 ... 50 mm² outer diameter Ø: 25 mm, hardwired, without Gu wire terminal.    		  
    Tightening torque Power circuit: 12 Nm 
    power circuit: 12 Nm 
    control circuit: 1.2 Nm (No 2 cross screw) 
    control circuit: 1.2 Nm (Ø 6 flat ports)    		  
    height 158 mm  
    width 120 mm  
    depth 136 mm  
    Control loop characteristics AC 50/60 Hz  
    Rated impulse withstand voltage [Uimp] 8 kV (according to IEC 60947)  
    protection cap no  
    (~50Hz pull-in) power consumption (VA) 280...350 VA on...20°C 60 Hz 
    280...350 VA on...20°C 50 Hz    		  
    product weight 2.5 kg  
    Contactor compatibility features M2  
    model LC1D  
    surroundings
    Standards compliant IEC 60947-4-1 
    GB 14048.4    		  
    certified product CCC  
    Pollution level 3  
    Protective measures TH (according to IEC 60068-2-30)  
    IP protection level IP2x front 
    panel main loop for IEC 60529 IP2x front panel coil loop for IEC 60529    		  
    Operating temperature -5...60 °C  
    Storage temperature -60...80 °C  
    Ambient air temperature -40...70 °C (allowed under Uc)  
    Working altitude 3000 m (none)  
    Fire resistance and abnormal heat resistance 850 °C (according to IEC 60695-2-11)  
    Shock and vibration performance Seismic performance (contact open): 2 gn (5...300 Hz) 
    seismic performance (contact closed state): 4 gn (5...300 Hz) 
    impact resistance (contact closed state): 15 gn 11 Ms 
    impact resistance (contact open): 6 gn 11 ms    		  
    Quality identification CE statement
         

    Modul PLC 140DDI84100, 140ACI03000, 140ACO13000
    Modul PLC 140DDI84100, 140ACI03000, 140ACO13000 Liên hệ
    Allen Bradley PLC SLC500 Input Module 1746-IM16
    Allen Bradley PLC SLC500 Input Module 1746-IM16 Liên hệ
    Allen Bradley PLC SLC500 Output Module 1746-OW16 16 CH-RELAY
    Allen Bradley PLC SLC500 Output Module 1746-OW16 16 CH-RELAY Liên hệ
    Cầu đấu PLC Siemens 20 40-pin 6ES7392 6ES7 392-1AJ00-0AA0, 392-1AM00-0AA0
    Cầu đấu PLC Siemens 20 40-pin 6ES7392 6ES7 392-1AJ00-0AA0, 392-1AM00-0AA0 Liên hệ
    Modun PLC, Siemens module 6ES7 Siemens PLC SM321 321-1BH02-0AA0
    Modun PLC, Siemens module 6ES7 Siemens PLC SM321 321-1BH02-0AA0 Liên hệ
    PLC MITSUBISHI FX1N-40MR-ES/UL
    PLC MITSUBISHI FX1N-40MR-ES/UL Liên hệ
    Aptomat thanh lý ABB Tmax, In=250A
    Aptomat thanh lý ABB Tmax, In=250A Liên hệ
    Công tắc tơ thanh lý, LC1D5011M5C 220V, LC1-D5011M5C 220V
    Công tắc tơ thanh lý, LC1D5011M5C 220V, LC1-D5011M5C 220V Liên hệ
    Công tắc tơ thanh lý, LC1D9511M5C 220V, LC1-D9511M5C 220V
    Công tắc tơ thanh lý, LC1D9511M5C 220V, LC1-D9511M5C 220V Liên hệ
    Role nhiệt thanh lý, LR9F5369 90-150A
    Role nhiệt thanh lý, LR9F5369 90-150A Liên hệ
    Công tắc tơ, khởi động từ hàng cũ, LC1D245M7C 220V, LC1-D245M7C 220V
    Công tắc tơ, khởi động từ hàng cũ, LC1D245M7C 220V, LC1-D245M7C 220V Liên hệ
    Công tắc tơ, khởi động từ hàng cũ, LC1D205M7C 220V, LC1-D205M7C 220V
    Công tắc tơ, khởi động từ hàng cũ, LC1D205M7C 220V, LC1-D205M7C 220V Liên hệ

     


    TÂN THÀNH CAM KẾT

    • Sản phẩm, hàng hóa chính hãng.
    • Giá cả cạnh tranh.
    • Dịch vụ chăm sóc khách hàng tận tâm.

    Thông Tin Công Ty

    Chính sách và quy định

    Đã thông báo

     

    Hỗ trợ khách hàng



    THÔNG TIN LIÊN HỆ:
    -------------------------------
    CÔNG TY TNHH THIẾT BỊ CÔNG NGHIỆP TTH
    Trụ sở: số 124 ngõ 79 Yên Hoà-Cầu giấy-HN
    Kinh doanh 1 : 0816.861.515
    Kinh doanh 2 : 0836.861.515
    Email: tthkinhdoanh@gmail.com
    Email: tthkinhdoanh01@gmail.com

  • Kết nối với chúng tôi


    • © Bản quyền thuộc về CÔNG TY TNHH THIẾT BỊ CÔNG NGHIỆP TTH. 

    Thiết kế bởi CÔNG TY TNHH THIẾT BỊ CÔNG NGHIỆP TTH.