3051: TG/TA
Smart gauge pressure transmitter
- Excellent performance: 0.075% FS~0.1% FS Turndown ratio: 100:1
- gauge pressure: calibration range from 0.3 to 10,000 psig
- Stainless steel and Hastelloy C process isolation diaphragm
- Single isolation diaphragm design
- filling liquid: silicone oil and inert liquid
- Optional DIN and process links to match Autoclave
One: as long as the characteristics
The 3051TG intelligent pressure transmitter can perform continuous self-test. If the problem transmitter is found, the user-selectable analog output alarm is activated and the Communicator can query the transmitter to determine the problem. The transmitter outputs specific information to the Communicator to identify the problem and is quick and easy to access. If the operator is convinced that it is a loop problem, the transmitter can provide a specific output as required for the loop test.
Range: gauge pressure: calibrated range from 10 to 17,400 psi
Accuracy: ±0.05% URLL/g of the adjustment range when the range is 1:1 to 15:1
Temperature: Zero: 0.25% / 28 ° C
Power source film impact: less than 0.005% output range / V
Vibration movable shadow ring: in the axial direction of man, the vibration frequency is 200Hz influence of the error of ± 0.05% URL / g
Negative carrier film impact: as long as the transmitter input voltage is higher than 12V, no impact load in the load workspace
Installation position effect: The maximum zero error can be generated no more than 0.25kPa, but it can be corrected and has no effect on the range.
Measuring the body has no effect on the rotation of the flange
Filling filling fluid: silicone oil or an inert liquid
Electric Gas shell material: low copper aluminum, stainless steel
Coating layer: polyester epoxy
O - ring: Teflon, butyl cyanide rubber (for cover), ethylene-propylene
Separator from the film piece: 316L Stainless Steel