Mô đun truyền thông HI-TOP CAN/CANOPEN to PROFIBUS DP bus converter gateway HT3S-DPS-CAN

Product Features:

▼Wide application: Any field device with a CAN bus interface and a 2.0A or 2.0B standard CAN communication protocol can use this product to interconnect the field device with PROFIBUS. Such as: frequency converters, motor starting protection devices, intelligent high and low voltage electrical appliances, power measurement devices, various transmitters, intelligent on-site measurement equipment and instruments, etc.

▼Simple application: Users can program independently to realize connection communication in a short time according to the manual and the application examples provided.

▼Transparent communication: HT3S-DPS-COP and HT3S-DPS-CAN are general-purpose communication products that can realize transparent transmission of communication messages between the PROFIBUS master station and the device.

▼Strong versatility: HT3S-DPS-COP, HT3S-DPS-CAN interface products have nothing to do with device communication protocols. The device communication protocol is implemented by PROFIBUS master station programming.

If the user product is an enterprise-specific communication protocol based on CAN bus, our company can customize a dedicated PROFIBUS communication adapter based on the product and sell it as a communication option for the user product. Please contact our company for technical details.

Technical Parameters:

⑴ PROFIBUS-DP/V0 protocol, conforms to: GB/T 20540-2006: Fieldbus for measurement and control of digital data communication industrial control systems Part 3: PROFIBUS specification and IEC61158: 2003TYPE10.

⑵ Standard PROFIBUS-DP driver interface, baud rate adaptive, maximum baud rate 12M;

⑶ Standard CAN 2.0 A or CAN2.0B or CANOPEN interface, baud rate: 5K, 10K, 20K, 40K, 50K, 80K, 100K, 125K, 200K, 250K, 400K, 500K, 666K, 800K, 1M optional; acceptance Code ACR and acceptance mask code AMR can be set by the user in the PROFIBUS configuration (such as in the STEP7 HARWARE configuration). The transmission control is controlled by the program control transmission bit (see Chapter 3 - 5, 6,); the transmission identification code ID0~ID10 and the data length DLC.0~DLC.3 can be flexibly set in the program according to the application;

⑷Power supply: 24VDC, maximum power 3.5W;

⑸ Working environment temperature: -40～85℃, humidity ≤95%

⑹ Overall dimensions: 50mm (width) × 126mm (height) × 94mm (thickness)

⑺ Installation: 35mm guide rail;

⑻ Protection level: IP20;

⑼ Approximate weight: 500g.